Descripción
The CAT93C86 is a 16-kb Serial EEPROM memory device which is configured as either registers of 16 bits (ORG pin at VCC) or 8 bits (ORG pin at GND). Each register can be written (or read) serially by using the DI (or DO) pin. The CAT93C86 features a self-timed internal write with auto-clear. On-chip Power-On Reset circuit protects the internal logic against powering up in the wrong state.
High Speed Operation: 3 MHz (5 V)
1.8 V to 5.5 V Supply Voltage Range
Selectable x8 or x16 Memory Organization
Self-timed Write Cycle with Auto-clear
Sequential Read
Hardware and Software Write Protection
Power-up Inadvertent Write Protection
Low Power CMOS Technology
Program Enable (PE) Pin
1,000,000 Program/Erase Cycles
100 Year Data Retention
Industrial and Extended Temperature Ranges
8-pin P-DIP and SOIC Packages
This Device is Pb-Free, Halogen Free/BFR Free
| Atributo | Valor |
|---|---|
| Tamaño de la Memoria | 16kbit |
| Tipo de Interfaz | Serie microcable |
| Tipo de Encapsulado | SOIC |
| Tipo de Montaje | Montaje superficial |
| Conteo de Pines | 8 |
| Organización | 2k x 8 bit |
| Tensión de Alimentación de Funcionamiento Mínima | 1.8 V |
| Tensión de Alimentación Máxima de Funcionamiento | 5.5 V |
| Tensión de Programación | 1.8 → 5.5V |
| Número de Bits de Palabra | 8bit |
| Dimensiones | 5 x 4 x 1.5mm |
| Temperatura de Funcionamiento Mínima | -40 °C |
| Número de Palabras | 2k |
| Data Retention | 100año |
| Tiempo de Acceso Aleatorio Máximo | 150ns |
| Temperatura Máxima de Funcionamiento | +85 °C |
Valoraciones
No hay valoraciones aún.