Descripción
Low Minimum Operating Current: 40 uA, Typ @ 25C
Voltage Reference Tolerance: 1%, Typ @ 25C
Programmable Output Voltage to 36 V
Low Dynamic Output Impedance, 0.22ohm Typical
Temperature Compensated for Operation over Full Rated Operating Temperature Range
Equivalent FullRange Temperature Coefficient of 50 ppm/C Typical
NCP431 is pin compatible to the TL432
NCP432 is pin compatible to the TL431
Benefits
Reduced power consumption
Accurate Reference Voltage
Allows for use in a broad range of applications
High and stable gain even at very low cathode current operation
Accurate reference across temperature
Accurate and reliable operation over the temperature range
Easily upgrade performance with no board level change
Alternate pin configuration
End Products
Adapters
Flat TVs
Applications
Switchmode Power Supplies
Instrumentation
| Atributo | Valor |
|---|---|
| Tensión Nominal | 2.5V |
| Tipo de Encapsulado | SOT-23 |
| Tipo de Referencia | Programable |
| Precisión Inicial | 0.5% |
| Tipo de Montaje | Montaje superficial |
| Topología | Derivador |
| Tensión Máxima de Entrada | 2.51 V |
| Tensión de Salida Máxima | 36 V |
| Conteo de Pines | 3 |
| Dimensiones | 3.04 x 1.4 x 1.01mm |
| Estándar de automoción | AEC-Q100 |
| Longitud | 3.04mm |
| Temperatura Máxima de Funcionamiento | +85 °C |
| Ancho | 1.4mm |
| Temperatura de Funcionamiento Mínima | -40 °C |
| Altura | 1.01mm |
Valoraciones
No hay valoraciones aún.